DIYables 12V Diaphragm Water Pump, Self Priming 3.5L Per Min DC Pump for Arduino

Pumps
$19.99
Final price shown on Amazon
Buy on Amazon
DIYables 12V diaphragm water pump with blue inlet and outlet ports and red and green leads Click to zoom
DIYables 12V diaphragm water pump with blue inlet and outlet ports and red and green leads12V diaphragm pump features: inlet and outlet for 7mm ID tubing, self-priming pump head, 12V DC motor up to 2A, 3.5L/min, 0.48MPa, 125 x 80 x 60mmSelf priming 12V DC pump label showing DP-521, 0.48MPa, 3.5L/min and 2.0A ratingsTop view of the diaphragm pump head with two blue ports and four screw-mount feet12V diaphragm water pump from above with stripped red and green wire leads

Quick Overview

The DIYables 12V diaphragm water pump is a compact self-priming DC pump for moving water in small projects. It runs on DC 12V with a maximum current of 2A, delivering a flow rate of up to 3.5L/min at a maximum pressure of 0.48MPa. It can be switched from Arduino, ESP32, ESP8266, and Raspberry Pi boards through a relay module or MOSFET driver.

Because it is self-priming, the pump does not need to be submerged. It can sit outside the tank and pull water from about 3 meters below, then push it about 4 to 5 meters up. The inlet and outlet ports share the same size, about 8.5mm outer diameter, and take silicone tubing with a 7mm inner diameter for a tight, leak-resistant fit. The body measures 125 x 80 x 60mm and is rated for ambient temperatures from -25°C to 85°C, 5% to 95%RH humidity, and liquid temperatures up to 55°C.

Ideal for garden and plant watering, misting and spray systems, aquarium and fish tank water changes, hydroponic and aquaponic reservoirs, RV and camper water supply, car washing, water dispensers, and liquid cooling loops. It runs directly from a 12V power supply, car battery, or solar battery system, and for automated projects it can be switched from Arduino, ESP32, ESP8266, or Raspberry Pi to build timed or sensor-triggered watering systems.

Key Features

  • 12V DC Diaphragm Pump — Runs on DC 12V at up to 2A for steady, reliable water transfer
  • 3.5L/min Flow Rate — Moves up to 3.5 liters per minute for watering, filling, and circulation tasks
  • 0.48MPa Maximum Pressure — Diaphragm design builds enough pressure for misting nozzles, sprayers, and long tubing runs
  • Self-Priming Suction — Draws water from about 3m below the pump, so it mounts outside the tank without submerging
  • 4 to 5m Lift — Pushes water about 4 to 5 meters high for raised planters and multi-level setups
  • Standard Hose Ports — Inlet and outlet are about 8.5mm outer diameter and fit 7mm inner diameter silicone tubing snugly
  • Wide Operating Range — Works from -25°C to 85°C ambient and 5% to 95%RH humidity, with liquid temperature resistance up to 55°C
  • Compact Body — 125 x 80 x 60mm size fits inside enclosures, planter boxes, and small equipment
  • Microcontroller Control — Switch it through a 12V relay module or MOSFET driver from Arduino, ESP32, ESP8266, or Raspberry Pi
  • Tutorial Support — Step-by-step pump control tutorials for Arduino, ESP32, ESP8266, and Raspberry Pi
  • Standalone or Automated — Runs directly from a 12V adapter, car battery, or solar battery, or under microcontroller control
  • Versatile Applications — Garden watering, misting and spraying, aquarium water changes, hydroponics, RV and camper water supply, car washing, and cooling loops
  • ...NOTE
  • The pump draws up to 2A at 12V, which is far more than any microcontroller pin can supply. Always power it from a separate 12V supply and switch it through a relay module or MOSFET driver.
  • ...NOTE

SPECIFICATION

Specification Value
Product Type Self-Priming Diaphragm Water Pump
Operating Voltage 12V DC
Maximum Current 2A
Maximum Pressure 0.48MPa
Maximum Flow Rate 3.5L/min
Suction Lift About 3m
Lift (Head) 4 to 5m
Inlet/Outlet Port About 8.5mm outer diameter (inlet and outlet same size)
Compatible Tubing Silicone hose, 7mm inner diameter
Liquid Temperature Up to 55°C
Working Temperature -25°C to 85°C
Working Humidity 5% to 95%RH
Dimensions 125mm x 80mm x 60mm (approx.)
Package Quantity 1 piece
Control Method Via relay module or MOSFET driver from a microcontroller
Compatibility Arduino, ESP32, ESP8266, Raspberry Pi (via relay or MOSFET)
Power Source 12V DC adapter, car battery, or solar battery system
Applications Garden watering, misting and spraying, aquarium water changes, hydroponics, RV and camper water supply, car washing, dispensers, cooling loops

COMPATIBLE HARDWARE

  • Arduino boards (UNO, Mega, Nano, etc.) — Control via 12V relay module or MOSFET driver
  • Arduino Uno R4 WiFi/Minima — WiFi-controlled watering and irrigation schedules
  • ESP32 development boards — IoT water control and remote pump switching
  • ESP8266 boards (NodeMCU, Wemos D1, etc.) — Smart watering and water transfer automation
  • Arduino Nano ESP32 — Compact automated watering systems
  • Raspberry Pi (all models) — Advanced water control and logging projects
  • Raspberry Pi Pico — Microcontroller-based pump control
  • Relay modules and MOSFET driver modules — Required for switching the 12V 2A pump load
  • 12V DC power supplies (2A or higher) — Power source for pump operation
  • Soil moisture sensors — Automatic plant watering triggers
  • Water level sensors and float switches — Automatic tank filling and draining
  • Any microcontroller with a digital output — Controls the pump through a relay or MOSFET stage