DIYables Barometric Pressure Sensor BMP280 3.3V I2C SPI Arduino, Presoldered
Click to zoom





Quick Overview
The DIYables GY-BMP280-3.3 Barometric Pressure Sensor Module puts the BMP280 digital pressure and temperature sensor on a compact, presoldered breakout board. It measures atmospheric pressure from 300 to 1100 hPa with about 0.12 hPa relative accuracy, enough to detect altitude changes of roughly one meter, and works with Arduino, ESP32, ESP8266, and Raspberry Pi.
The module runs from a 3.3V supply and communicates over I2C (address 0x76 or 0x77, set by the SDO pin) or 4-wire SPI using the CSB pin. Its six header pins (VCC, GND, SCL, SDA, CSB, SDO) come soldered, so it plugs straight into a breadboard or connects with jumper wires. This 3.3V version has no onboard regulator, so power it from 3.3V and use a level shifter with 5V logic boards.
Ideal for weather stations, barometric altimeters, drone and model rocket altitude logging, indoor climate monitoring, and IoT environmental sensing. The 5 pack gives you enough modules for multiple projects, classroom kits, or spares.
Key Features
- BMP280 Digital Sensor — Measures barometric pressure from 300 to 1100 hPa plus ambient temperature on one chip
- High Precision Readings — About 1 hPa absolute and 0.12 hPa relative accuracy, roughly 1 meter of altitude resolution
- Dual I2C and SPI Interface — I2C at address 0x76 or 0x77, or 4-wire SPI via the CSB pin
- Two Sensors on One I2C Bus — Selectable address through the SDO pin lets two modules share the same bus
- 3.3V Operation — Runs directly from 3.3V boards such as ESP32, ESP8266, and Raspberry Pi
- Built-In Temperature Sensing — Temperature range of -40°C to +85°C for compensation and climate readings
- Low Power Consumption — Very low current draw suits battery-powered and portable devices
- Presoldered Header Pins — Six pins ready for breadboard or jumper wire connection, no soldering needed
- Compact Breakout Board — Small footprint fits drones, enclosures, and wearable projects
- 5 Pack Value — Five modules for multiple builds, classrooms, or spares
SPECIFICATION
| Specification | Value |
|---|---|
| Product Type | Barometric Pressure Sensor Module |
| Module Model | GY-BMP280-3.3 |
| Sensor Chip | BMP280 |
| Pressure Range | 300 to 1100 hPa |
| Pressure Accuracy | ±1 hPa absolute, ±0.12 hPa relative |
| Pressure Resolution | 0.16 Pa (20-bit output) |
| Temperature Range | -40°C to +85°C |
| Temperature Accuracy | ±1°C |
| Operating Voltage | 3.3V (no onboard regulator) |
| Interface | I2C (0x76 / 0x77) and SPI |
| Pins | VCC, GND, SCL, SDA, CSB, SDO |
| Assembly | Presoldered header pins |
| Package Quantity | 5 pieces |
| Compatibility | Arduino, ESP32, ESP8266, Raspberry Pi, Raspberry Pi Pico, STM32 |
| Applications | Weather stations, altimeters, drones, indoor climate monitoring, IoT environmental sensing |
PACKAGE
A package includes:
| Qty | Items |
|---|---|
| 5 | GY-BMP280-3.3 Barometric Pressure Sensor Module (presoldered) |
COMPATIBLE HARDWARE
- ESP32 development boards — Direct 3.3V I2C or SPI connection for IoT weather stations
- ESP8266 boards — 3.3V I2C connection for wireless pressure logging
- Raspberry Pi (all models) — 3.3V I2C or SPI for environmental monitoring
- Raspberry Pi Pico — 3.3V I2C for portable barometric sensing
- Arduino Nano ESP32 — Native 3.3V logic for compact altitude tracking
- Arduino UNO, Mega, Nano — I2C or SPI connection, use a level shifter for 5V logic
- STM32 boards — 3.3V I2C or SPI for data logging and drone altitude hold
- OLED/LCD displays — Show pressure, altitude, and temperature readings
- SD card modules — Log atmospheric pressure data over time
- Any microcontroller with I2C or SPI interface and 3.3V supply