DIYables Barometric Pressure Sensor BMP280 5V I2C, Presoldered

$9.99
Final price shown on Amazon
Buy on Amazon
DIYables BMP280 5V barometric pressure sensor module with presoldered right-angle header pins Click to zoom
DIYables BMP280 5V barometric pressure sensor module with presoldered right-angle header pinsBMP280 5V sensor infographic: 300-1100 hPa range, ±0.12 hPa accuracy, 3.3-5V supplyBMP280 module front angle showing the BME/BMP280 silkscreen, sensor chip and mounting holeSide view of the BMP280 5V board with right-angle pins extending past the edgeBMP280 pinout view with VIN, GND, SCL and SDA labels beside the right-angle headerBMP280 sensor module top view showing the metal BMP280 chip, capacitors and I2C pin labelsLow side-angle view of the BMP280 5V sensor board and its right-angle headerFive presoldered BMP280 5V barometric pressure sensor modules included in the 5 pack

Quick Overview

The DIYables BMP280 5V Barometric Pressure Sensor Module measures air pressure and temperature on one small, presoldered board. It reads atmospheric pressure from 300 to 1100 hPa with about ±0.12 hPa relative accuracy, fine enough to notice altitude changes of roughly one meter, and reports temperature from -40°C to +85°C. It works with Arduino, ESP32, ESP8266, Raspberry Pi, and Raspberry Pi Pico.

This version accepts either a 3.3V or 5V supply, so it connects directly to 5V boards such as Arduino Uno, Mega, and Nano as well as to 3.3V boards. It talks over I2C using just SDA and SCL, and widely available BMP280 libraries return pressure, temperature, and calculated altitude in a few lines of code. The sensor draws only a few microamps at one reading per second and about 0.1µA in sleep mode, so it suits battery-powered loggers. Header pins come soldered on the compact 13.4 × 10.6mm board, ready for a breadboard.

Ideal for weather stations, barometric altimeters, drone and model rocket altitude logging, hiking gadgets, indoor climate monitoring, and IoT environmental sensing.

Key Features

  • BMP280 Digital Sensor — Barometric pressure and temperature on one chip
  • 300–1100 hPa Pressure Range — Covers sea level to high-altitude conditions
  • High Relative Accuracy — About ±0.12 hPa, roughly 1 meter of altitude change
  • Built-In Temperature Sensing — -40°C to +85°C range
  • 3.3V and 5V Supply — Connects directly to 5V Arduino boards and 3.3V ESP32, ESP8266, and Raspberry Pi boards
  • Simple I2C Interface — Only SDA and SCL needed, supported by common BMP280 libraries
  • Ultra-Low Power — A few microamps at 1 Hz and about 0.1µA in sleep mode
  • Presoldered Header Pins — Breadboard ready with no soldering
  • Compact 13.4 × 10.6mm Board — Fits drones, enclosures, and wearable projects
  • Tutorial Support — Step-by-step BMP280 wiring and code tutorials for Arduino and ESP32
  • 5 Pack Value — Five modules for multiple builds, classrooms, or spares

SPECIFICATION

Specification Value
Product Type Barometric Pressure and Temperature Sensor Module
Sensor Chip BMP280
Pressure Range 300 to 1100 hPa
Pressure Accuracy ±1 hPa absolute, ±0.12 hPa relative
Pressure Resolution 0.16 Pa
Temperature Range -40°C to +85°C
Temperature Accuracy ±1°C
Supply Voltage 3.3V – 5V
Interface I2C
Sleep Current About 0.1µA
Dimensions 13.4mm × 10.6mm
Assembly Presoldered header pins
Package Quantity 5 pieces
Compatibility Arduino, ESP32, ESP8266, Raspberry Pi, Raspberry Pi Pico
Applications Weather stations, altimeters, drones, model rockets, indoor climate monitoring, IoT environmental sensing

PACKAGE

A package includes:

Qty Items
5 BMP280 5V Barometric Pressure Sensor Module (presoldered)

COMPATIBLE HARDWARE

  • Arduino boards (UNO, Mega, Nano, etc.) — I2C (UNO: A4 SDA, A5 SCL), 5V supply
  • Arduino Uno R4 WiFi/Minima — I2C, 5V supply
  • ESP32 development boards — I2C (default GPIO21 SDA, GPIO22 SCL), 3.3V supply
  • ESP8266 boards (NodeMCU, Wemos D1, etc.) — I2C (D2 SDA, D1 SCL), 3.3V supply
  • Raspberry Pi (all models) — I2C (GPIO2 SDA, GPIO3 SCL), 3.3V supply
  • Raspberry Pi Pico — I2C (GP4 SDA, GP5 SCL), 3.3V supply
  • OLED and LCD displays — show pressure, altitude, and temperature readings
  • Any microcontroller with an I2C interface — 3.3V or 5V