DIYables Digital Voltmeter DC 0-100V 0.28 Inch Red LED 3 Wire Panel Meter
Click to zoom








Quick Overview
The DIYables 0.28 Inch Digital Voltmeter shows DC voltage on a bright three-digit red LED display, measuring from 0 to 100V with 1% accuracy and refreshing every 200ms. It is a compact panel meter for batteries, power supplies, vehicles, and Arduino or ESP32 project enclosures.
In 3 wire mode the meter is powered separately from a 5V to 30V supply while the measurement lead reads anywhere from 0 to 100V, ideal for high-voltage battery packs and power rails. In 2 wire mode the power and measurement leads are joined, so the meter powers itself from the circuit it measures between 4V and 30V. Reverse polarity protection on the power input guards against wiring mistakes, and the 30 x 11.7 x 9.2mm body fits a 23 x 10mm panel cutout.
Ideal for monitoring lithium and lead acid battery packs, bench and lab power supplies, solar systems, car, motorcycle, RV and boat electrical systems, e-bikes, scooters, chargers, and DIY electronics enclosures.
Key Features
- 0.28 Inch Red LED Display — Three-digit red LED digital tube for clear, easy-to-read voltage readings
- DC 0-100V Measuring Range — Wide range in 3 wire mode covers 12V, 24V, 48V, and higher voltage systems
- 3 Wire and 2 Wire Modes — Separate 5V to 30V supply for 0-100V, or self-powered 4V to 30V measurement
- 1% Measurement Accuracy — Stable, accurate readings for battery and power supply monitoring
- 200ms Refresh Rate — Fast display updates show voltage changes in real time
- Reverse Polarity Protection — Protected power input helps prevent damage from reverse wiring
- Compact Panel Mount — 30 x 11.7 x 9.2mm body fits a standard 23 x 10mm cutout
- Wide Working Temperature — Operates from -10°C to +65°C
- 3 Pack Value — Three voltmeters for multiple batteries, supplies, or projects
SPECIFICATION
| Specification | Value |
|---|---|
| Product Type | DC Digital Voltmeter Panel Meter |
| Display | 3-digit 0.28 inch red LED digital tube |
| Measuring Range (3 Wire) | DC 0V to 100V |
| Measuring Range (2 Wire) | DC 4V to 30V |
| Power Supply (3 Wire) | DC 5V to 30V |
| Extreme Supply Limits | 4.0V minimum, 40V maximum |
| Measurement Accuracy | 1% |
| Refresh Rate | 200ms per reading |
| Protection | Reverse polarity protection on power input |
| Dimensions | 30mm x 11.7mm x 9.2mm |
| Panel Cutout | 23mm x 10mm |
| Working Temperature | -10°C to +65°C |
| Working Humidity | 10% to 80% (non-condensing) |
| Working Air Pressure | 80kPa to 106kPa |
| Package Quantity | 3 pieces |
| Applications | Battery monitoring, power supplies, solar systems, car and RV electrical, e-bikes, DIY enclosures |
※ NOTE THAT:
Avoid mounting the voltmeter in direct sunlight, as it can make the LED display hard to read and affect operation.
PACKAGE
A package includes:
| Qty | Items |
|---|---|
| 3 | 0.28 Inch DC 0-100V Digital Voltmeter (Red LED, 3 Wire) |
COMPATIBLE HARDWARE
- 12V, 24V, 36V, 48V, and 72V battery packs — Voltage monitoring in 3 wire mode up to 100V
- Lithium and lead acid batteries — State of charge monitoring by voltage
- Bench and lab power supplies — Permanent output voltage readout
- DC-DC buck and boost converters — Display the adjusted output voltage
- Solar charge controllers and panels — Monitor system and battery voltage
- Car, motorcycle, RV, and boat electrical systems — Dashboard voltage display
- Arduino, ESP32, and Raspberry Pi project enclosures — Show supply rail voltage
- Any DC circuit from 0 to 100V (3 wire mode needs a separate 5V to 30V supply)