DIYables 10K NTC Thermistor 3950 Waterproof Temperature Sensor with Resistor
Click to zoom




Quick Overview
The DIYables 10K NTC thermistor set includes five waterproof temperature sensor probes and five matching 10K resistors. Each probe uses a 10K ohm 1% NTC thermistor with a 3950 B value, sealed in a 5 x 25mm stainless steel sheath on a 0.5m two-wire lead, and measures temperatures from -20°C to 105°C. It works with Arduino, ESP32, ESP8266, Raspberry Pi Pico, and any board with an analog input.
Connect the thermistor in series with the included 10K resistor to form a voltage divider, then read the midpoint with an analog input pin. Convert the reading to temperature using the Steinhart-Hart or B-parameter equation. The probe has a typical dissipation constant of 5mW/°C, insulation resistance above 100MΩ, withstands AC 1800V for 2 seconds, and holds a 9.8N (1kgf) pull for 1 minute without deformation.
Ideal for aquarium and fish tank monitoring, refrigerator and freezer alarms, home brewing and fermentation, water heaters, incubators, greenhouses, hydroponics, and HVAC or battery temperature logging.
Key Features
- 10K 1% NTC Thermistor — 10K ohm at 25°C with 1% tolerance for consistent readings across all five probes
- 3950 B Value — Standard NTC 3950 curve works with common Steinhart-Hart and B-parameter code
- -20°C to 105°C Range — Covers water, refrigeration, brewing, and ambient temperature monitoring
- Waterproof Stainless Steel Probe — Sealed 5 x 25mm steel sheath for use in water, soil, and air
- 0.5m Two-Wire Lead — Simple two-wire output with enough length to reach tanks and enclosures
- 10K Resistor Included — Matching 10K resistor for each probe to build the voltage divider right away
- Robust Insulation — Over 100MΩ probe insulation and AC 1800V withstand for 2 seconds
- Strong Lead Attachment — Withstands 9.8N (1kgf) pull for 1 minute without deformation
- Wide Compatibility — Works with Arduino, ESP32, ESP8266, Raspberry Pi Pico, and any board with an ADC input
- 5 Set Value Pack — Five probes and five resistors for multi-point monitoring or spares
- ...NOTE
- Raspberry Pi single board computers (Pi 3, 4, 5) do not have analog inputs. Use an external ADC module such as the ADS1115 or MCP3008 to read the thermistor.
- ...NOTE
SPECIFICATION
| Specification | Value |
|---|---|
| Product Type | Waterproof NTC Thermistor Temperature Sensor Probe |
| Thermistor Type | NTC 10K ±1% |
| B Value | 3950 |
| Measurement Range | -20°C to 105°C |
| Dissipation Constant | 5mW/°C (typical) |
| Probe Material | Stainless steel, waterproof |
| Probe Size | 5 x 25mm |
| Cable Length | 0.5m |
| Output | 2 wires (analog, resistive) |
| Insulation Resistance | >100MΩ |
| Withstand Voltage | AC 1800V, 1mA, 2 seconds |
| Pull Strength | 9.8N (1kgf) for 1 minute, no deformation |
| Interface | Analog (voltage divider with 10K resistor) |
| Package Quantity | 5 thermistor probes, 5 10K resistors |
| Compatibility | Arduino, ESP32, ESP8266, Raspberry Pi Pico, any board with ADC input |
| Applications | Aquarium, fridge and freezer, home brewing, water heater, incubator, greenhouse, HVAC |
PACKAGE
A package includes:
| Qty | Items |
|---|---|
| 5 | 10K 1% NTC 3950 Waterproof Thermistor Temperature Sensor Probe (0.5m) |
| 5 | 10K Ohm Resistor |
COMPATIBLE HARDWARE
- Arduino boards (UNO, Mega, Nano, etc.) — Analog input pins (A0 to A5)
- Arduino Uno R4 WiFi/Minima — Analog input pins
- ESP32 development boards — ADC input pins
- ESP8266 boards (NodeMCU, Wemos D1, etc.) — A0 analog input
- Arduino Nano ESP32 — Analog input pins
- Raspberry Pi Pico — ADC pins (GP26 to GP28)
- Raspberry Pi (all models) — Through an external ADC module such as ADS1115 or MCP3008
- Any microcontroller with an ADC input — 3.3V or 5V reference with the included 10K resistor









