DIYables 28BYJ-48 ULN2003 5V Stepper Motor with Driver for Arduino, ESP32, ESP8266, Raspberry Pi, 2 pieces
Click to zoom
Quick Overview
The DIYables 28BYJ-48 stepper motor kit includes two 28BYJ-48 5V stepper motors and two ULN2003 driver boards. It’s a popular combination for learning motion control and building positioning projects because the driver board simplifies wiring and control.
The package contains:
- 2 x 28BYJ-48 stepper motors
- 2 x ULN2003 drivers
Key Features
- 2 Complete Sets Included — Includes 2 stepper motors and 2 ULN2003 driver boards for building and prototyping
- 28BYJ-48 5V Unipolar Stepper Motor — 5-wire unipolar stepper motor with 5V supply voltage
- ULN2003 Driver Board — Provides an easy interface between your controller and the stepper motor; accepts 3.3V or 5V logic signals
- Common Motion Control Choice — Useful for small positioning mechanisms, dials, and learning stepper basics
- Wide Controller Compatibility — Works with Arduino (5V logic), ESP32, ESP8266 (3.3V logic), Raspberry Pi, and other microcontrollers
- Tutorial Support — Arduino tutorials are provided via the linked guides
SPECIFICATION
| Specification | Value | |
|---|---|---|
| Product Type | Stepper Motor Kit with Driver | |
| Motor Model | 28BYJ-48 | |
| Driver Model | ULN2003 | |
| Motor Type | 5-wire unipolar stepper motor | |
| Motor Supply Voltage | 5V | |
| Logic Voltage | 3.3V or 5V | |
| Included Quantity | 2 motors + 2 drivers | |
| Steps per Revolution | Approximately 2038 (with gear) | |
| Gear Ratio | 1 | 64 |
| Step Angle | 5.625°/64 | |
| Operating Frequency | 100 Hz | |
| Torque | 34 N·cm (approx.) |
Tutorials
- Arduino - 28BYJ-48 ULN2003 5V Stepper Motor tutorial
- Arduino Nano - 28BYJ-48 ULN2003 5V Stepper Motor tutorial
- Arduino Nano ESP32 - 28BYJ-48 ULN2003 5V Stepper Motor tutorial
- ESP32 - 28BYJ-48 ULN2003 5V Stepper Motor tutorial
- ESP8266 - 28BYJ-48 ULN2003 5V Stepper Motor tutorial
- Raspberry Pi - 28BYJ-48 ULN2003 5V Stepper Motor tutorial
COMPATIBLE HARDWARE
This 28BYJ-48 stepper motor kit is compatible with:
- Arduino Uno R3
- Arduino Uno R4 WiFi
- Arduino Nano
- Arduino Nano ESP32
- Arduino Mega
- ESP32 Development Board
- ESP8266
- Raspberry Pi
- Raspberry Pi Pico
- 2WD Robot Car Kit
- DIYables R3 Board
- DIYables STEM V3 Board
